VCT Floor Cleaning

High quality floor care with a plan designed for your business

Just Some of Our VCT Work


From autoscrubbers to propane strippers to premium quality floor finishes we only offer the best


Our products are non-toxic, super effective, and safe for you and your family of children and pets


4-6 hours of dry time with our super suction truckmount, allowing you to get back to life sooner.


Backed by my 30 day promise to take care of you no matter what. Life happens, so even a new spot or spill only requires a phone call for us to come back and help you out.

VCT Cleaning and Maintenance

VCT floors are found in almost every commercial application. From schools to grocery stores and office buildings – these floors are the number 1 choice. Like any flooring – they have their own cleaning needs.

Stripping and Waxing

A strip and wax is necessary when the old floor finish has either been wore down from not doing top scrubs or from too much dirt being embedded in the finish from improper floor maintenance. This consists of using a stripper solution to emulsify the old finish from the tile, a powered low rpm buffer or a propane stripper to help remove the finish, neutralizing the floor with cold water to seal the pores. The final step is to lay down at least 4 coats of premium floor finish.

Top Scrub

A top scrub should be performed at least once a quarter, possibly more depending on the foot traffic at your facility. This process uses a light cleaner with a special pad to remove the top layer or two of dirt from the floor finish. Clean water is mopped on to close the pores of the tile and then new premium floor finish is applied. The great thing about utilizing the top scrub process is you constantly have a new looking floor year round. At least four coats of finish are normally applied, so if the dirt is trapped in the first two layers that are removed… the bottom two layers never have to be stripped. This is a cost savings for you !!! Many customers will have this service done at the same time we take their area rugs out to clean,


There are a few things that you can do to help keep vct protected. The first is to have a professional apply a premium floor finish. Since VCT is a porous material, without this protection the tile can become permanently discolored due to ground in dirt. Once the finish has been applied you will want to have some long entry mats into your facility by the both the outside doors and inside warehouse doors if you have them. 75% of dirt comes off in the first 30 feet of flooring! Next plan on dust mopping at least once a day to help prevent dirt from embedding into the floor finish. Last but not least you should mop once a day if at all possible and at least every other day. Make sure when mopping to change the water frequently so dirty water doesn’t get back onto the floor. A floor buffing schedule can and will also keep your floor looking great all year long. Call us today for all you VCT floor cleaning needs!

(440) 785-1545